Shock Springs - Inmotion Suspension https://inmotionsuspension.com.au Dirtbike Gear & Suspension Services Wed, 27 Dec 2023 03:35:54 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 Eibach Shock Spring EMS 62.80 x 62.80 x 247mm 882 Series https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-62-80-x-62-80-x-247mm-882-series/?utm_source=rss&utm_medium=rss&utm_campaign=eibach-shock-spring-ems-62-80-x-62-80-x-247mm-882-series https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-62-80-x-62-80-x-247mm-882-series/#respond Mon, 23 Oct 2023 04:47:34 +0000 https://inmotionsuspension.com.au/?post_type=product&p=7177 Eibach’s MOTO springs provide tuning capability for maximum perfromance and durability on any terrain. Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider. Ultra-Lightweight for Reduced Unsprung Mass Each Spring Individually Tested Highest Linearity and Guaranteed Consistency Made In U.S.A.

The post Eibach Shock Spring EMS 62.80 x 62.80 x 247mm 882 Series first appeared on Inmotion Suspension.

]]> Eibach’s MOTO springs provide tuning capability for maximum perfromance and durability on any terrain.

  • Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider.
  • Ultra-Lightweight for Reduced Unsprung Mass
  • Each Spring Individually Tested
  • Highest Linearity and Guaranteed Consistency
  • Made In U.S.A.

    The post Eibach Shock Spring EMS 62.80 x 62.80 x 247mm 882 Series first appeared on Inmotion Suspension.

    ]]>     https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-62-80-x-62-80-x-247mm-882-series/feed/ 0     Eibach Shock Spring EMS 62.2 x 62.2 x 265mm 898 Series https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-62-2-x-62-2-x-265mm-898-series/?utm_source=rss&utm_medium=rss&utm_campaign=eibach-shock-spring-ems-62-2-x-62-2-x-265mm-898-series https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-62-2-x-62-2-x-265mm-898-series/#respond Mon, 23 Oct 2023 04:39:01 +0000 https://inmotionsuspension.com.au/?post_type=product&p=7135 Eibach’s MOTO springs provide tuning capability for maximum perfromance and durability on any terrain. Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider. Ultra-Lightweight for Reduced Unsprung Mass Each Spring Individually Tested Highest Linearity and Guaranteed Consistency Made In U.S.A.

    The post Eibach Shock Spring EMS 62.2 x 62.2 x 265mm 898 Series first appeared on Inmotion Suspension.

    ]]>     Eibach’s MOTO springs provide tuning capability for maximum perfromance and durability on any terrain.

    • Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider.
    • Ultra-Lightweight for Reduced Unsprung Mass
    • Each Spring Individually Tested
    • Highest Linearity and Guaranteed Consistency
    • Made In U.S.A.

      The post Eibach Shock Spring EMS 62.2 x 62.2 x 265mm 898 Series first appeared on Inmotion Suspension.

      ]]>       https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-62-2-x-62-2-x-265mm-898-series/feed/ 0       Eibach Shock Spring EMS 63.1 x 60.6 x 270mm 892 Series https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-63-1-x-60-6-x-270mm-892-series/?utm_source=rss&utm_medium=rss&utm_campaign=eibach-shock-spring-ems-63-1-x-60-6-x-270mm-892-series https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-63-1-x-60-6-x-270mm-892-series/#respond Mon, 23 Oct 2023 04:31:57 +0000 https://inmotionsuspension.com.au/?post_type=product&p=7108 Eibach’s MOTO springs provide tuning capability for maximum perfromance and durability on any terrain. Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider. Ultra-Lightweight for Reduced Unsprung Mass Each Spring Individually Tested Highest Linearity and Guaranteed Consistency Made In U.S.A.

      The post Eibach Shock Spring EMS 63.1 x 60.6 x 270mm 892 Series first appeared on Inmotion Suspension.

      ]]>       Eibach’s MOTO springs provide tuning capability for maximum perfromance and durability on any terrain.

      • Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider.
      • Ultra-Lightweight for Reduced Unsprung Mass
      • Each Spring Individually Tested
      • Highest Linearity and Guaranteed Consistency
      • Made In U.S.A.

        The post Eibach Shock Spring EMS 63.1 x 60.6 x 270mm 892 Series first appeared on Inmotion Suspension.

        ]]>         https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-63-1-x-60-6-x-270mm-892-series/feed/ 0         Eibach Shock Spring EMS 66.6 x 64.0 x 260mm 889 Series https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-66-6-x-64-0-x-267mm-889-series/?utm_source=rss&utm_medium=rss&utm_campaign=eibach-shock-spring-ems-66-6-x-64-0-x-267mm-889-series https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-66-6-x-64-0-x-267mm-889-series/#respond Mon, 23 Oct 2023 04:22:53 +0000 https://inmotionsuspension.com.au/?post_type=product&p=7092 Eibach’s MOTO springs provide tuning capability for maximum perfromance and durability on any terrain. Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider. Ultra-Lightweight for Reduced Unsprung Mass Each Spring Individually Tested Highest Linearity and Guaranteed Consistency Made In U.S.A.

        The post Eibach Shock Spring EMS 66.6 x 64.0 x 260mm 889 Series first appeared on Inmotion Suspension.

        ]]>         Eibach’s MOTO springs provide tuning capability for maximum perfromance and durability on any terrain.

        • Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider.
        • Ultra-Lightweight for Reduced Unsprung Mass
        • Each Spring Individually Tested
        • Highest Linearity and Guaranteed Consistency
        • Made In U.S.A.

          The post Eibach Shock Spring EMS 66.6 x 64.0 x 260mm 889 Series first appeared on Inmotion Suspension.

          ]]>           https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-66-6-x-64-0-x-267mm-889-series/feed/ 0           Eibach Shock Spring EMS 66.50 x 64.0 x 243mm 881 Series https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-66-50-x-64-0-x-243mm-881-series/?utm_source=rss&utm_medium=rss&utm_campaign=eibach-shock-spring-ems-66-50-x-64-0-x-243mm-881-series https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-66-50-x-64-0-x-243mm-881-series/#respond Mon, 23 Oct 2023 04:10:47 +0000 https://inmotionsuspension.com.au/?post_type=product&p=7077 Eibach’s MOTO springs provide tuning capability for maximum perfromance and durability on any terrain. Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider. Ultra-Lightweight for Reduced Unsprung Mass Each Spring Individually Tested Highest Linearity and Guaranteed Consistency Made In U.S.A.

          The post Eibach Shock Spring EMS 66.50 x 64.0 x 243mm 881 Series first appeared on Inmotion Suspension.

          ]]>           Eibach’s MOTO springs provide tuning capability for maximum perfromance and durability on any terrain.

          • Eibach EMS Springs Available in a Full Range of Rates to Fine Tune Suspension to each Rider.
          • Ultra-Lightweight for Reduced Unsprung Mass
          • Each Spring Individually Tested
          • Highest Linearity and Guaranteed Consistency
          • Made In U.S.A.

            The post Eibach Shock Spring EMS 66.50 x 64.0 x 243mm 881 Series first appeared on Inmotion Suspension.

            ]]>             https://inmotionsuspension.com.au/product/eibach-shock-spring-ems-66-50-x-64-0-x-243mm-881-series/feed/ 0             K-Tech Rear Shock Spring 5962-270 https://inmotionsuspension.com.au/product/rear-shock-spring-5962-270/?utm_source=rss&utm_medium=rss&utm_campaign=rear-shock-spring-5962-270 https://inmotionsuspension.com.au/product/rear-shock-spring-5962-270/#respond Wed, 14 Jun 2023 08:41:26 +0000 https://inmotionsuspension.com.au/product/rear-shock-spring-5962-270/ K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1. Cold coiled Heat treated […]

            The post K-Tech Rear Shock Spring 5962-270 first appeared on Inmotion Suspension.

            ]]>             K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1.

            • Cold coiled
            • Heat treated
            • Tempered
            • Shot Peened
            • Ground ends
            • Zinc phosphate coated
            • Epoxy powder coated
            • Part numbered

             

            The post K-Tech Rear Shock Spring 5962-270 first appeared on Inmotion Suspension.

            ]]>             https://inmotionsuspension.com.au/product/rear-shock-spring-5962-270/feed/ 0             K-Tech Rear Shock Spring 61-260 https://inmotionsuspension.com.au/product/rear-shock-spring-61-260-2/?utm_source=rss&utm_medium=rss&utm_campaign=rear-shock-spring-61-260-2 https://inmotionsuspension.com.au/product/rear-shock-spring-61-260-2/#respond Wed, 14 Jun 2023 08:41:26 +0000 https://inmotionsuspension.com.au/product/rear-shock-spring-61-260-2/ K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1. Cold coiled Heat treated […]

            The post K-Tech Rear Shock Spring 61-260 first appeared on Inmotion Suspension.

            ]]>             K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1.

            • Cold coiled
            • Heat treated
            • Tempered
            • Shot Peened
            • Ground ends
            • Zinc phosphate coated
            • Epoxy powder coated
            • Part numbered

             

            The post K-Tech Rear Shock Spring 61-260 first appeared on Inmotion Suspension.

            ]]>             https://inmotionsuspension.com.au/product/rear-shock-spring-61-260-2/feed/ 0             K-Tech Shock Spring 47-130 https://inmotionsuspension.com.au/product/shock-spring-47-130/?utm_source=rss&utm_medium=rss&utm_campaign=shock-spring-47-130 https://inmotionsuspension.com.au/product/shock-spring-47-130/#respond Wed, 14 Jun 2023 08:41:25 +0000 https://inmotionsuspension.com.au/product/shock-spring-47-130/ K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1. Cold coiled Heat treated […]

            The post K-Tech Shock Spring 47-130 first appeared on Inmotion Suspension.

            ]]>             K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1.

            • Cold coiled
            • Heat treated
            • Tempered
            • Shot Peened
            • Ground ends
            • Zinc phosphate coated
            • Epoxy powder coated
            • Part numbered

             

             

            The post K-Tech Shock Spring 47-130 first appeared on Inmotion Suspension.

            ]]>             https://inmotionsuspension.com.au/product/shock-spring-47-130/feed/ 0             K-Tech Rear Shock Spring 63-260 https://inmotionsuspension.com.au/product/rear-shock-spring-63-260/?utm_source=rss&utm_medium=rss&utm_campaign=rear-shock-spring-63-260 https://inmotionsuspension.com.au/product/rear-shock-spring-63-260/#respond Wed, 14 Jun 2023 08:41:25 +0000 https://inmotionsuspension.com.au/product/rear-shock-spring-63-260/ K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1. Cold coiled Heat treated […]

            The post K-Tech Rear Shock Spring 63-260 first appeared on Inmotion Suspension.

            ]]>             K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1.

            • Cold coiled
            • Heat treated
            • Tempered
            • Shot Peened
            • Ground ends
            • Zinc phosphate coated
            • Epoxy powder coated
            • Part numbered

             

             

            The post K-Tech Rear Shock Spring 63-260 first appeared on Inmotion Suspension.

            ]]>             https://inmotionsuspension.com.au/product/rear-shock-spring-63-260/feed/ 0             K-Tech Rear Shock Spring 5356-245 https://inmotionsuspension.com.au/product/rear-shock-spring-5356-245/?utm_source=rss&utm_medium=rss&utm_campaign=rear-shock-spring-5356-245 https://inmotionsuspension.com.au/product/rear-shock-spring-5356-245/#respond Wed, 14 Jun 2023 08:41:25 +0000 https://inmotionsuspension.com.au/product/rear-shock-spring-5356-245/ K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1. Cold coiled Heat treated […]

            The post K-Tech Rear Shock Spring 5356-245 first appeared on Inmotion Suspension.

            ]]>             K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1.

            • Cold coiled
            • Heat treated
            • Tempered
            • Shot Peened
            • Ground ends
            • Zinc phosphate coated
            • Epoxy powder coated
            • Part numbered

             

            The post K-Tech Rear Shock Spring 5356-245 first appeared on Inmotion Suspension.

            ]]>             https://inmotionsuspension.com.au/product/rear-shock-spring-5356-245/feed/ 0